This receiver requires a stable 24v power supply, so instead of the Marantec Digital 991, order the Marantec Digital 992 . The Marantec Digital 991 is a plug-in receiver with a protection class IP20 and a frequency of 868.3 MHz bi-linked. For connecting newer...

The V2 ABLE-AX-KEY-B-433 is a compact, robust wireless keypad with illuminated keys, suitable for all V2 receivers on 433 MHz  The battery has a lifespan of approximately 2 years with daily use under normal conditions. The keypad is easy to mount and program, directly...

The Marantec Special 104 240mm / 260mm is an extended pull rod (extension) for moving the pull and pressure points. When mounting the drive rail is not possible at the lintel or above the door leaf. Suitable for tilting and sectional doors/doors, supplied with...

The Teleradio T20RX-03ASM is a 3-channel receiver on 869.85 MHz. The receiver can operate up to 3 different gates/doors and is suitable for Teleradio NKM remote controls. The T20RX-03ASM is equipped with 3 relays with normally open (NO) and normally closed (NC) electrical contact,...

The V2 Phoenix2-433 is a 2-channel remote control with a frequency of 433.92 MHz, gray back and black front. This is an old model, order the new model: V2 ABLE TX TOH2 433C. We also have a cost-effective alternative for the V2 remote controls:...

The Marantec D304-433 is a 4-channel remote control with a uniform light gray front and back. This remote control operates on a frequency of 433.92 MHz Multi-Bit and is supplied with a wall bracket and a coding plug. This is an old model that...

Marantec Digital 164.2 868 MHz plug-in receiver on 868.3 MHz Multi-bit, equipped with antenna wire, suitable for the Marantec Multi-bit remote controls on 868 MHz. Easy to install into the plug-in opening, the module can simply be placed into the designated connection on the...

The Ditec VS-ZENP2 is an alternative remote control for Ditec/Entrematic ZENP models. The hand transmitter has a black housing with 2 black buttons. The remote control has a frequency of 868 MHz and AES128 encryption and must be taught directly to the motor/receiver. Attention!...

Compacte stabiele voeding voor aansluiting van ontvangers en codeklavieren in situaties waar geen stopcontact is voorzien. Specificaties Beschermingsgraad IP20 Type Voeding voor Ontvangers en Codeklavieren Input Voltage 220-240V AC ~ 50/60Hz. Output Voltage 12 V DC (DC) with 2.5 A. Powre 30 Watt /...

The Nice Era W1 is a modern 1-channel wall transmitter for operating a garage door or roller shutter. The wall transmitter is suitable for all Nice motors and receivers from the Era series, as well as tubular motors from the Era Mat and Era...

The Decoder Cody Light HF 1/2 is the control unit for the Geba keypads. These are connected by a simple 2-wire cable; a plug is not required. The Cody Light decoder is programmed using a Geba code keyboard. TIPTOMATIC The Cody Light HF is...

The Marantec Digital 993 868 MHz conversion kit is an intermediate plug housing that allows your current garage door operator to work with the white bi-linked remote controls from Marantec. This conversion kit from Marantec is compatible with virtually any motor and must be...

Attention: This SZ-13 SL rail can only be picked up! The Marantec SZ-13 SL Timing Belt Rail is suitable for Marantec engines Comfort 220, 257.2, 260, 260 battery, 270, 280, 360, 370 and 380. This is a micro-profiled drive rail with 0.8 mm profile...

The 128REV-01 for Chamberlain is a 2-channel wireless push button, suitable for controlling 1 or 2 garage doors/gates. The wall transmitter has a modern, elegant design and is easy to mount on the wall. The 128REV-01 is suitable for the following engines: - ML510EV...

This model is sold out, order instead: Ferport TAC 2 KR . The Ferport TAC 4 KR is a 2-channel dark gray remote control with 10 DIP switches and a frequency of 433.92MHz. Easy to set by setting the DIP switches to match your...

The Beninca ONE.2WB is a 2-channel receiver on 433.92 MHz, compatible with Beninca TO.GO remote controls. Specifications Brand Beninca Type ONE.2WB Frequency 433.92 MHz Coding ARC 128 bit / Rolling code / fixed code Memory places 512 Power supply 21-28 Vac / 12-28 Vdc...

Marantec Comfort 380 motor head, including Digital 572 2-channel transmitter and Digital 564 4-channel transmitter (rail not included, available as an option). The integrated power-saving technology and LED lighting make the drive particularly energy-efficient, and the control system protects the garage door. The sensitive...

The VS-401-433-LR (Long Range) is a universal 2-channel 433.92 MHz radio receiver, suitable for various brands of remote controls and code keypads. The receiver has an IP54 housing with antenna for an extra long range. It is an ideal solution for problems with existing...

The V2 Flexy 2 is an analogue control unit for swing gates, equipped with a built-in 433.92 MHz receiver. Some possibilities at a glance: Adjustment and programming via trimmer and dip switch. 230V power supply for 2 single-phase motors. Built-in V2 433.92 MHz receiver....

The Nice K4M is a remote control with a black housing, 4 yellow keys and DIP switches. This model is no longer in production, we supply another model instead which is functionally identical. Available in frequencies 26.995 MHz, 27.120 MHz, 30.875 MHz or 30.900...