Expansion board Relay EP163 for Marantec 200-300 series garage door operators for connecting a warning light. This package consists of: - Expansion board. - Printed circuit board holder, 25 mm. - Connection cable. Features: - Programmable relay output. - Programmable input. - Suitable for...

This coding plug allows you to connect/pair the grey D300 series Multi-Bit remote controls from Marantec with each other for programming. This coding adapter is supplied as standard with a new Marantec Multi-Bit remote control. The programming plug is suitable for the following models:...

This coding cable/programming cable makes it possible to program a new Marantec D300 series remote control using an old D200 series remote control. The coding adapter is suitable for the following old Marantec D200 models: D211-433, D212-433, D214-433, D221-433, D222-433, D224-433, and also for...

Marantec Control 950 signal lamp, version 12V-24V DC, for signal indication before or during the movement of the gate/door. Supplied without wall bracket. Depending on the programming, the Control 950 can flash or remain continuously lit, and the lamp is 180-degree rotatable. Attention!The flashing...

Double the light capacity of your Marantec garage door motor with this EL300 LED set. This LED extension is compatible with the Marantec Comfort 360, Comfort 370 and Comfort 380 motors. Together with the existing LED strip, this kit can produce up to 1000...

Double the light capacity of your Marantec garage door motor with this EL200 LED set. This LED extension is compatible with the Marantec Comfort 260, Comfort 270 and Comfort 280 motors. Easy to plug in with a plug connection next to the existing LED...

Reducer from motor head to Marantec running rail. Transition piece between the serrated shaft of the motor head to the serrated entrance on the running rail. Specifications Brand Marantec Type Reducer from motor head to running rail (timing belt/chain/ball cord) Also known as Axle...

Reference cam for fitting in Marantec and other garage door/garage door chain rails. The corresponding screw is included. Specifications Brand Marantec Type Reference cam for chain rail Also known as Switch cam / reference cam roller chain / reference cam for chain rails

This reference cam must be placed on the toothed belt rail of your garage door and ensures that the motor can stop in time. If this is not present, the motor has no reference point. This is suitable for the older types of Marantec...

This universal wall mount is ideal for mounting your remote control on the wall. The remote control holder is available in black and can be easily mounted with one screw. Looking for a holder to attach to the sun visor? Check out this model...

This universal sun visor clip is ideal for attaching your remote control to the sun visor of your car. The sun visor holder is available in black and, thanks to the handy sliding system, it is compatible with many models. Please see below for...

This self-adhesive holder is suitable for the Sommer TX55-868-4 Pearl, Pearl Vibe and the TX55-868-4 Pearl Twin models. Comes with degreaser and adhesive strips for easy installation. Specifications Type Holder Pearl / Pearl Twin Also known as 4643V000 Suitable for Sommer Pearl / Pearl...

This glass fuse holder can be used to protect electrical circuits from excessive current. Easy to connect when installing an extra receiver as extra security. Supplied with a 100mA glass fuse. The holder is suitable for glass fuses of 5x20mm max. 5 ampere, has...

NEW! LED version, more light output with very low consumption! View here . 2 x light bulb for garage door/garage door motors/linear drives Sommer Duo Vision produced from 06/2001. The lower consumption of this lamp ensures that the motor cover will not melt due...

NEW! LED version, more light output with very low consumption! View here 2 x light bulb for garage door/garage gate with motors/linear drives Sprint, Marathon and Aperto produced from 06/2001. You will receive 2 pieces, so you always have a spare at hand! Also...

2 x LED lamp for garage door/garage gate with motors/linear drives Sprint, Marathon, Duo Vision and Aperto produced from 06/2001. Also suitable for Sommer motors installed by L-Door. Because these lamps use LED technology, they have very low consumption (2.3 watts), heat up less...

The Marantec Special 104 240mm / 260mm is an extended pull rod (extension) for moving the pull and pressure points. When mounting the drive rail is not possible at the lintel or above the door leaf. Suitable for tilting and sectional doors/doors, supplied with...

This plug-in power supply simplifies the connection of an external receiver to your existing garage door or gate motor. Use this power adapter to supply power to an external receiver via the mains. By using this external power supply you only need to connect...

Compacte stabiele voeding voor aansluiting van ontvangers en codeklavieren in situaties waar geen stopcontact is voorzien. Specificaties Beschermingsgraad IP20 Type Voeding voor Ontvangers en Codeklavieren Input Voltage 220-240V AC ~ 50/60Hz. Output Voltage 12 V DC (DC) with 2.5 A. Powre 30 Watt /...

Universele USB-adapter voor het opladen/voeden van verschillende apparaten, voor gebruik in Nederlandse stopcontacten. Met een output van 5V en 1000mA biedt deze adapter betrouwbare en stabiele prestaties, perfect voor smartphones, tablets, en andere USB-apparaten. Je krijgt 4 stuks geleverd. Specificaties Type USB-adapter Voltage 100-240v-50/60Hz...

Marantec Control 950 signal lamp with wall bracket, version 12V-24V DC, for signal indication before or during the movement of the gate/door. Supplied with wall bracket. Depending on the programming, the Control 950 can flash or remain continuously lit, and the lamp is 180-degree...

This custom-made connection cable is suitable for the Ultra, Ultra Excellent, Magic 600 and Magic 1000 motors from Crawford, Normstahl and Entrematic, to enable the connection of additional accessories (external receivers). This cable allows you to easily install our KP-01 set .

EP 141 Uitbreidingsprintplaat voor drukknoppen met systeembekabeling. Voor Marantec 200-300 series garagepoort aandrijvingen voor het aansluiten van een waarschuwingslicht. Dit pakket bestaat uit: - Uitbreidingsprintplaat. - Printplaathouder, 25 mm. - Verbindingskabel MS-Bus RJ14, 200 mm. Kenmerken: - Programmeerbare relaisuitgang. - Programmeerbare ingang. - Geschikt...

EP 141 Expansion board for push buttons with system cabling. For Marantec 200-300 series garage door operators for connecting a warning light (Control 950). This package consists of: - Expansion board. - Printed circuit board holder, 25 mm. - Connection cable MS-Bus RJ14, 250...

Boost the signal/range of your installation via this external antenna. Thanks to the long cable (8 meters) and the pre-assembled bracket, you can easily attach it to an outside wall to maximize the signal. The antenna is suitable for frequencies 433 MHz and 868...