-
Emergency release lock for garage door 12mmVendor: ZenderserviceWith this release lock you can manually unlock your garage door in the event of a power failure, so that you can open it by hand. The lock has a nut lock, making it vandal-proof. It is easy to install and suitable for virtually...
- €24.99
€25.99- €24.99
- Unit price
- per
-
Marantec Special 306 emergency releaseVendor: MarantecWe offer an alternative for this model: Emergency Release Lock for Garage Door 12mm. The Marantec Special 306 is an emergency release for garage doors. This cylinder lock is retrofitted into the door and connected to the release of the drive system via a...
- €31.99
€35.99- €31.99
- Unit price
- per
-
Garage door release lockVendor: ZenderserviceWith this release lock you can unlock your garage door in the event of a power failure, so that you can open it manually by hand. It is easy to install and suitable for virtually all models of garage doors. It has a steel...
- €29.99
€34.99- €29.99
- Unit price
- per
-
Panasonic battery for Telecody / Telecody+Vendor: PanasonicThis battery is suitable for the Sommer Telecody and Telecody+ keypads. Specifications Brand Panasonic Suitable for Telecody / Telecody+ Battery type CR123 Also known as CR123, CR123-A, CR-123A, CR-123, EL123, DL-123, DL-123AB, 123-SANYO, DL123A, EL123A, K123LA, CR17345, EL123AP, SF123A1
- €8.99
- €8.99
- Unit price
- per
-
CR2016 3V battery (2 pcs)Vendor: Zenderservice2x CR2016 3V button cell battery. Suitable for the following remote controls: AT02 ATOMO Gibidi Domino Came TOP-432EV / TOP-432NA / TOP-434EV / TOP-434NA / TOP44FGN / TOP862EE / TOP864EE Mhouse TX3 / TX4 Specifications Type CR2016 button cell Voltage 3V Quantity 2 pieces...
- €8.99
- €8.99
- Unit price
- per
-
CR2032 3V battery (2 pieces)Vendor: Zenderservice2 x CR2032 3V button cell battery. Suitable for the following remote controls: Sommer4020 TX03-868-44026 TX03-868-2Slider 4031Slider+PearlPearl Twin MarantecD300 seriesDigital 564/572 bi linkVS-027-868-M (check model)VS-027-868-H (check model)VS-027-868-B (check model) DitecGol 4/4CZEN CardinS449S486 PrastelSLIM+TC4E TeleradioT20 NKM/NKL FaacXT2/XT4 Specifications Type CR2032 button cell Voltage 3V Quantity...
- €6.99
€9.99- €6.99
- Unit price
- per
-
Extra Battery 27A 12VVendor: EunicellThis 27A 12V Alkaline battery is suitable for the following remote controls: VS-CN4 / VS-NO4 / VS-002-433 / VS-015BC Please note: First confirm which battery is in your current remote control. This model also exists with a CR2032 battery. Specifications Brand EverActive Type 27A...
- €4.99
€6.99- €4.99
- Unit price
- per
-
Eastcell 23A 12V batteryVendor: EastcellThis 23A 12V Alkaline battery is suitable for specific models of Hormann, BFT, Erone, Nice (FLO/FLORS), Dickert, Sommer 4050, Life, TAC, Almatic, Beninca. Specifications Brand Eastcell Type 23A 12V Alkaline Suitable for specific models of Hormann, BFT, Erone, Nice (FLO/FLORS), Dickert, Sommer 4050, Life,...
- €5.99
- €5.99
- Unit price
- per
-
Varta 11A 6V batteryVendor: VartaThis 11A 6V GP Alkaline battery is suitable for the Hormann HSE2-868 and HSE2-40 remote controls. Specifications Brand GP Type 11A 6V Suitable for HSE2-868 and HSE2-40 Also known as A11 MN11 11A 6V / LR11A
- €6.99
- €6.99
- Unit price
- per
-
Marantec EP163 relay expansion boardVendor: MarantecExpansion board Relay EP163 for Marantec 200-300 series garage door operators for connecting a warning light. This package consists of: - Expansion board. - Printed circuit board holder, 25 mm. - Connection cable. Features: - Programmable relay output. - Programmable input. - Suitable for...
- €29.99
€30.99- €29.99
- Unit price
- per
-
Universal Photocells 180 Degree RotatableVendor: ZenderserviceThis set of infrared photocells is used for security when opening and closing your garage door, garage door or gate. This set consists of a transmitter and receiver that use infrared technology and can be easily connected to any motor. Because these photocells can...
- €28.99
€31.99- €28.99
- Unit price
- per
-
Universal photocell setVendor: ZenderserviceThe set of photocells serves as security when closing/opening your garage door or gate. This set consists of a transmitter and receiver that use infrared technology and can be easily connected to any motor. In addition, they are also water and UV resistant. -...
- €14.99
€19.99- €14.99
- Unit price
- per
-
Marantec Special 633 photocellsVendor: MarantecView our alternative set: Universal Photocells 180 Degree Rotatable . The Marantec Special 633 is a one-way photocell with a range of up to 8 metres, suitable for swing and sliding gates, supplied without wiring. Features: • Optical safety feature to protect against injury...
- €82.99
- €82.99
- Unit price
- per
-
Marantec coding cableVendor: MarantecThis coding cable/programming cable makes it possible to program a new Marantec D300 series remote control using an old D200 series remote control. The coding adapter is suitable for the following old Marantec D200 models: D211-433, D212-433, D214-433, D221-433, D222-433, D224-433, and also for...
- €9.99
- €9.99
- Unit price
- per
-
Marantec coding plugVendor: MarantecThis coding plug makes it possible to connect/pair the grey D300 series Multi-Bit remote controls from Marantec with each other for programming. This coding adapter is supplied as standard with a new Marantec Multi-Bit remote control. The programming plug is suitable for the following...
- €6.99
- €6.99
- Unit price
- per
-
Marantec Control 950 signal lampVendor: MarantecMarantec Control 950 signal lamp, version 12V-24V DC, for signal indication before or during the movement of the gate/door. Supplied without wall bracket. Depending on the programming, the Control 950 can flash or remain continuously lit, and the lamp is 180-degree rotatable. Attention!The flashing...
- €48.99
€51.99- €48.99
- Unit price
- per
-
Marantec EL300 LED extensionVendor: MarantecDouble the light capacity of your Marantec garage door motor with this EL300 LED set. This LED extension is compatible with the Marantec Comfort 360, Comfort 370 and Comfort 380 motors. Together with the existing LED strip, this kit can produce up to 1000...
- €29.99
- €29.99
- Unit price
- per
-
Marantec EL200 LED extensionVendor: MarantecDouble the light capacity of your Marantec garage door motor with this EL200 LED set. This LED extension is compatible with the Marantec Comfort 260, Comfort 270 and Comfort 280 motors. Easy to plug in with a plug connection next to the existing LED...
- €22.89
€26.99- €22.89
- Unit price
- per
-
Marantec adapter motor head to railVendor: MarantecReducer from motor head to running rail Marantec.Transition piece between the serrated shaft of the motor head and the serrated entrance on the running rail. Specifications Brand Marantec Type Reducer from motor head to running rail (toothed belt/chain/ball cord) Also known as Axle adapter...
- €6.99
- €6.99
- Unit price
- per
-
Marantec reference cam for chain railVendor: MarantecReference cam for fitting in Marantec and other garage door/garage door chain rails. The corresponding screw is included. Specifications Brand Marantec Type Reference cam for chain rail Also known as Switch cam / reference cam roller chain / reference cam for chain rails
- €8.99
- €8.99
- Unit price
- per
-
Remote control holderVendor: ZenderserviceThis universal wall holder is ideal for mounting your remote control on the wall. The transmitter holder is available in black and can easily be mounted with a single screw. Looking for a holder to attach to your car's sun visor? Then take a...
- €12.99
€13.99- €12.99
- Unit price
- per
-
Sun visor clip for remote controlVendor: ZenderserviceThis universal sun visor holder is ideal for attaching your remote control to the sun visor of your car. The sun visor holder is available in black and thanks to its handy extendable system, this holder is compatible with a wide range of models....
- €8.99
- €8.99
- Unit price
- per
-
Sommer bulb 32.5V 18W BA 15s for Duo Vision (2 pcs)Vendor: SommerNEW! LED version, more light output with very low consumption! View here . 2 x light bulb for garage door/garage door motors/linear drives Sommer Duo Vision produced from 06/2001. The lower consumption of this lamp ensures that the motor cover will not melt due...
- €24.99
- €24.99
- Unit price
- per
-
Sommer bulb 32.5V 34W BA 15s for Sprint/Marathon/Aperto (2 pcs)Vendor: SommerNEW! LED version, more light output with very low consumption! View here 2 x light bulb for garage door/garage gate with motors/linear drives Sprint, Marathon and Aperto produced from 06/2001. You receive 2 pieces, so you always have a spare at hand! Also suitable...
- €26.99
- €26.99
- Unit price
- per
-
LED Lamp 32.5V 2.3W (2 pieces)Vendor: Sommer2 x LED lamp for gate/garage door with motors/linear drives Sprint, Marathon, Duo Vision and Aperto produced from 06/2001. Also suitable for Sommer motors installed by L-Door. Because these lamps use LED technology, they have very low consumption (2.3 watts), heat up less and...
- €25.99
€27.99- €25.99
- Unit price
- per
-
Power Supply for Universal ReceiversVendor: ZenderserviceThis plug-in power supply simplifies the connection of an external receiver to your existing garage door or gate motor. Use this power adapter to supply power to an external receiver via the mains. By using this external power supply you only need to connect...
- €12.99
- €12.99
- Unit price
- per
-
Marantec reference cam for belt rail (2 pcs)Vendor: MarantecThis reference cam must be placed on the timing belt rail of your garage door and ensures that the motor can stop in time. If this cam is not present, the motor has no reference point. This cam is suitable for the older types...
- €12.99
- €12.99
- Unit price
- per
-
Marantec Command 132-868 built-in transmitterVendor: MarantecThe Marantec Command 132 868 MHz is a mini flush-mounted transmitter with 4 channels, equipped with a battery, for the connection of external push buttons/switches. The transmitter has an IMPULSE function for up to four channels (or ON/OFF for two channels), and can be...
- €59.99
€63.99- €59.99
- Unit price
- per
-
Marantec Special 104 extended pull arm 240 / 260 mmVendor: MarantecThe Marantec Special 104 240mm / 260mm is an extended pull rod (extension piece) for relocating the pull and push points. For when mounting the drive rail on the lintel or above the door leaf is not possible. Suitable for up-and-over and sectional doors,...
- €17.99
- €17.99
- Unit price
- per
-
Glass fuse holder + glass fuseVendor: ZenderserviceThis glass fuse holder can be used to protect electrical circuits against excessive current. Easy to connect when installing an additional receiver as extra protection. Supplied with a 100mA glass fuse. The holder is suitable for 5x20mm glass fuses of max. 5 amps, has...
- €6.99
€8.99- €6.99
- Unit price
- per
-
Cover cap Command 231Vendor: MarantecIf the cover flap of your Marantec Command 231 keypad has broken off or needs replacing, you can easily replace it with this part. The cover flap can easily be attached to the Marantec 231 keypad. Suitable for:Marantec Command 231 868 MHzMarantec Command 231...
- €17.99
€19.99- €17.99
- Unit price
- per
-
Marantec Control 950 signal lamp with wall bracketVendor: MarantecMarantec Control 950 signal lamp with wall bracket, version 12V-24V DC, for signal indication before or during the movement of the gate/door. Supplied with wall bracket. Depending on the programming, the Control 950 can flash or remain continuously lit, and the lamp is 180-degree...
- €61.99
- €61.99
- Unit price
- per
-
Digiten keypad protective cap (2 pieces)Vendor: DigitenSpare protective caps for the Digiten keypad from Armas Ferport, supplied in a set of 2. Easy to replace on your existing Digiten keypad. Specifications Brand Digiten (Armas Ferport) Type Protective cap for keypad Quantity 2 pieces
- €9.99
- €9.99
- Unit price
- per
-
Marantec EP141 relay expansion boardVendor: MarantecEP 141 expansion board for push buttons with system wiring. For Marantec 200-300 series garage door operators, for connecting a warning light. This package contains: - Expansion board. - Board holder, 25 mm. - MS-Bus RJ14 connection cable, 200 mm. Features: - Programmable relay...
- €34.99
- €34.99
- Unit price
- per
-
Marantec EP 161 relay expansion boardVendor: MarantecEP 161 Expansion board for push buttons with system cabling. For Marantec 200-300 series garage door operators for connecting a warning light (Control 950). This package consists of: - Expansion board. - Printed circuit board holder, 25 mm. - Connection cable MS-Bus RJ14, 250...
- €34.99
- €34.99
- Unit price
- per
-
Marantec push-button board for CS300, CS310, CS320, CS400Vendor: MarantecMFZ push button PCB for Marantec and MFZ CS300, CS310, CS320 and CS400 control units. Including connection cable and circuit board. Specifications Brand Marantec / MFZ Type Push button PCB Suitable for CS300, CS310, CS320 and CS400 control units Included Circuit board and connection...
- €47.99
- €47.99
- Unit price
- per
-
Faac E600 control unit for D600Vendor: FaacThe Faac E600 is the electronic control board for the Faac D600 sectional door operator. The board runs on 220-240 V AC mains voltage and drives the motor at 24 V DC. The E600 is available under article number 63003655. The same control board...
- €169.99
- €169.99
- Unit price
- per
-
Faac E1000 control board for D1000Vendor: FaacThe Faac E1000 is the electronic control board for the Faac D1000 sectional door operator. The board runs on 230 V mains voltage. The E1000 is available under article number 63003657. The same control board was previously coded 2024025. The control board has inputs...
- €189.99
- €189.99
- Unit price
- per
