The VS-RSC4-433-ECO is an alternative remote control for Hörmann Ecostar. The remote control has a dark grey housing, 4 dark grey buttons and a frequency of 433.92 MHz. This remote control is suitable for the following Ecostar drives:Liftronic 500 / Liftronic 700 / Liftronic...

The VS-ZEN4 for Ditec Entrematic is a remote control with 4 black keys. The transmitter has a frequency of 433 MHz and is a cost-effective alternative to the Ditec Entrematic ZEN2. This model is compatible with the Ditec Entrematic BIXLP2, BIXLG4, BIXLS2 and GOL...

The Alutech AT-4N 433 MHz remote control is a black design remote control with 4 buttons, a sturdy key ring, suitable for Alutech 433 MHz motors including AT-4, ASG 600, ASG 1000 and AR-1-500. Programming must be done directly on the motor/receiver! NB: Do...

The AXK4P is a wireless, illuminated 4-channel code keypad for Entrematic and Ditec, with a black casing, 12 keys, and a frequency of 868.35 MHz. It supports fixed code, rolling code, AES-128bit Encrypted, and PROTECTED Mode.The keypad offers two power options: a 9 V...

The Cardin S476 is a 2-channel remote control with a frequency of 433.92 MHz, a black housing and green buttons. The transmitter uses a fixed code, which you set with DIP switches. Set the DIP switches to the same position as on your existing...

The DEA 281/2 is a 2-channel receiver for DEA remote controls at 433.92 Mhz with HCS Rolling-Code, Dip-Switch and D.A.R.T. encoding. Compatible with the following models:DEA GTI, GT, MIO TR, MIO TD, GENIE 273, GENIE 273L, GOLD 288, GOLD 289, Punto, GT2M, GT4M, GTX,...

The DEA GTX2/N is a black 2-channel remote control with brown buttons and a frequency of 433 MHz, supporting 3 encodings: HCS Rolling-Code, Dip-Switch, D.A.R.T. Please note! This remote control can only be directly programmed to a compatible DEA receiver; you cannot copy your...

The Ditec XENXR2 is a pre-wired 2-channel receiver operating at 433.92 Mhz, compatible with Ditec ZEN2, ZEN4, and GOL4 remotes. Specifications Brand Ditec Type ZENXR2 Frequency 433.92 Mhz Encoding Ditec Dip Switch, Fixed code, Rolling code, AES 128-bit Encrypted Memory slots 200 Number of...

Nice Morx decoder for EDS, EDSI and ETP The Nice Morx decoder is a powerful and reliable solution for access control within automation systems. This decoder has been specially developed for use with Nice keypads (EDS / EDSI) and transponder card readers (ETP), allowing...

The Nice MYGO4 is the latest model with a black casing, 4 black keys and a frequency of 433.92 MHz. The remote control is easily programmable via your existing Nice remote control, or can be programmed directly to a suitable receiver. The Nice MYGO4...

Marantec Comfort 390 motor head Please note! This motor is supplied without receiver, remote control and rail! The integrated power-saving technology and LED lighting make the drive particularly energy-efficient, and the control system protects the garage door. The sensitive obstacle detection immediately stops the...

The Ditec ZENP2 is a remote control with a white housing and 2 black buttons. The hand transmitter has a frequency of 868 MHz and AES128 coding. Attention!This model is not to be confused with the ZEN or ZEN C models, which have a...

This glass fuse holder can be used to protect electrical circuits from excessive current. Easy to connect when installing an extra receiver as extra security. Supplied with a 100mA glass fuse. The holder is suitable for glass fuses of 5x20mm max. 5 ampere, has...

The Cody Touch is an illuminated modern anti-vandal wired surface-mounted code keypad in a black scratch-resistant metal frame with 12 keys and integrated blue lighting. The code panel is suitable for Cody Light decoders from Geba and is easy to connect via the 5...

The Life FIDO2 is a remote control with a black housing, 4 dark gray buttons and a frequency of 433.92 MHz. This is an old model and was replaced by the Life MAXI 4. Specifications Brand Life Type FIDO4 Frequency 433.92 MHz Coding Rolling...

The Telecody+ is a wireless code keypad with illuminated keys and a frequency of 868.8 MHz FM, suitable for L-Door installations with Sommer motor. The code panel is screwed into a vandal-resistant aluminum bracket that can be easily attached to the wall and cannot...

The Nice SMILO SM2 is a 2-channel remote control with a frequency of 433.92 MHz. Specifications Brand Nice Type SMILO SM2 Frequency 433.92 MHz Coding Rolling Code Number of buttons 2 Alternatives VS-005-MULTI

The Novoferm Novotron 512 MIX 43-2 is a 2-button remote control with a frequency of 433.92 MHz and an average range of approx. 100 metres in open field. This remote control was replaced by a new model: Novotron 502 MAX 43-02 . For this...

The Eutech 433 MHz external antenna is an outdoor antenna for 433 MHz receivers. It comes with a wall bracket and a 5 m coaxial cable. An external antenna is useful when the receiver is installed in a spot where the signal has trouble...

The Beninca IRI.TX4VA is an exclusive remote control with a refined finish and a chrome-plated bottom. IRI.TX4VA allows you to set up to 9 channels, thanks to the possibility of activating the command by simultaneously pressing two keys of your choice. With 12V battery...