The Seip EKR1MCGEF Mini is an external 1-channel receiver with a frequency of 433 MHz, suitable for the Seip SKR/TS series on 230v. The receiver has 25 memory locations and is ideal for making existing motors compatible with Seip remote controls and code keyboards....

De Erone SETR2641AM2B is een 2-kanaals afstandsbediening met een egale lichtgrijze behuizing, 2 blauwe knoppen en een frequentie van 433.92 MHz. Deze handzender moet je programmeren in de buurt van de ontvanger. De SETR2641AM2B/4B is bestemd voor het bedienen van automatische sluitsystemen en anti-inbraaksystemen...

V2 EASY2 control for 1 single-phase motor up to 700W with connector for MR plug-in receiver. Programming via DIP & potentiometers and LED indication. Some possibilities at a glance: 230V power supply for 1 single-phase motor. Plug-in adapter for modular radio receiver MR2. Up,...

The Teleco TVTXK868A04 is an illuminated wireless keypad with a black housing, 12 gray keys, 4 channels and a frequency of 868 MHz. The code panel is suitable for Teleco receivers on 868 MHz, has an IP54 protection degree and has a range of...

The Marantec Digital 351 is a 3-channel receiver with a frequency of 868.3 MHz, multi-bit coding and an IP32 protection rating. Thanks to the built-in transformer, the receiver can be connected to both 230 volts and 12-24 volts. Each channel can be programmed for...

Order the ZENP2 instead The Ditec ZENP4 is a remote control with a white housing and 4 black buttons. The remote control has a frequency of 868 MHz and AES128 encryption. Attention! This model is not to be confused with the ZEN or ZEN...

This model was replaced by a new model: Ditec ZEN2C . We also have an alternative for this model: VS-005-MULTI . The Ditec GOL4C is a dark gray remote control with black housing and 4 gray keys with red LED protection on top. Please...

The Mhouse MT4 MOOVO is a 4-channel remote control. This version has a green housing with 4 gray buttons. The Mhouse MT4 MOOVO has a frequency of 433.92 MHz with a rolling code coding. We have an alternative for this model: VS-005-MULTI . Specifications...

This model was replaced by another model: Instead, order Novotron 502 MAX 43-2 or VS-NO4 . The Novoferm TX 43-2 is a 2-channel remote control with a black housing and grey keys and is easy to set up using our own supplied manual. Note...

The V2 Phoenix4-433 is a 2-channel remote control with a frequency of 433.92 MHz, gray back and black front. This is an old model, order the new model: V2 ABLE TX TOH4 433C . We also have a cost-effective alternative for the V2 remote controls:...

The TXR433A012 is a black 12-channel remote control with blue rubber, 3 buttons, and a frequency of 433.92 MHz. Looking for a wireless keypad for Mac / Teleco? TXK433B04. Specifications Type TXR433A12 Also suitable for MAC Frequency 433.92 MHz Encoding Rolling code Number of...

Marantec digital 941 is a modular antenna with magnetic base on 868 MHz for Marantec bi-linked (white remote controls). To be used on the following engines: -Comfort 260, as well as battery and speed versions -Comfort 270, as well as battery and speed versions -Comfort...

The Entrya ES4-KPB kit with a black surface-mounted keypad offers a reliable and user-friendly solution for access control of up to two doors and 100 unique codes . Expansion with a second keypad is possible. This kit can be used in 2 modes: Basic...

The Memo expansion module, plugged into the motor control of the Base+, Pro+, Tiga+, Twist UG, Twist AM, STArter S2(+) and ASB alu, automatically stores all stored transmitters in its external memory and can program up to 450 memory locations. This memory card also...

The VS-RSC2-433-ECO is an alternative remote control for Hörmann Ecostar. The remote control has a dark gray housing, 2 dark gray buttons and a frequency of 433.92 MHz. This remote control is suitable for the following Ecostar drives: Liftronic 500 / Liftronic 700 /...

The VS-ZEN4 for Ditec Entrematic is a remote control with 4 black keys. The transmitter has a frequency of 433 MHz and is a cost-effective alternative to the Ditec Entrematic ZEN2. This model is compatible with the Ditec Entrematic BIXLP2, BIXLG4, BIXLS2 and GOL...

The Alutech AT-4N 433 MHz remote control is a black design remote control with 4 buttons, a sturdy key ring, suitable for Alutech 433 MHz motors including AT-4, ASG 600, ASG 1000 and AR-1-500. Programming must be done directly on the motor/receiver! NB: Do...

The AXK4P is a wireless, illuminated 4-channel code keypad for Entrematic and Ditec, with a black casing, 12 keys, and a frequency of 868.35 MHz. It supports fixed code, rolling code, AES-128bit Encrypted, and PROTECTED Mode.The keypad offers two power options: a 9 V...

The Marantec Digital 317 is an 868.3 MHz Multi-Bit remote control with 999 channels and display function. Using the supplied programming cable, you can easily transfer multiple transmitters that are already in use to the D317-868. Operation is simple, enter the desired channel number...

The Cardin RQM449200 is a 2-channel receiver on 433.92 MHz, suitable for all variants of the S449 remote control including: TXQ449300 - Cardin TXQ449300 with 3 channels, TXQ4494P0 - Cardin TXQ4494P0 with 4 channels, RQM449200 - Cardin RQM449200 mini 2 channels 433 MHz, TXQ449100...

The DEA 281/2 is a 2-channel receiver for DEA remote controls at 433.92 Mhz with HCS Rolling-Code, Dip-Switch and D.A.R.T. encoding. Compatible with the following models:DEA GTI, GT, MIO TR, MIO TD, GENIE 273, GENIE 273L, GOLD 288, GOLD 289, Punto, GT2M, GT4M, GTX,...

The DEA GTX2/N is a black 2-channel remote control with brown buttons and a frequency of 433 MHz, supporting 3 encodings: HCS Rolling-Code, Dip-Switch, D.A.R.T. Please note! This remote control can only be directly programmed to a compatible DEA receiver; you cannot copy your...

WERKT ENKEL IN COMBINATIE MET MORX DECODER De Nice EDS is een robust vandaalbestendig verlicht bedraad codeklavier te gebruiken in combinatie met de MORX decoder. Decoder Morx kan u hier vinden Specificaties Merk Nice Type EDS Voeding Via MORX decoder Aantal knoppen 12 Beschermingsgraad...

The Nice MYGO4 is the latest model with a black casing, 4 black keys and a frequency of 433.92 MHz. The remote control is easily programmable via your existing Nice remote control, or can be programmed directly to a suitable receiver. The Nice MYGO4...

The Nice MYGO2 is the latest model with a black casing, 2 black keys and a frequency of 433.92 MHz. The remote control is easily programmable via your existing Nice remote control, or can be programmed directly to a suitable receiver. The Nice MYGO2...

The Dickert MAHS27-01 is a single-channel remote control with red buttons and LED, a frequency of 27.015 MHz AM, and microswitches inside (DIP-10). To program this remote control, you must set the switches to match those of an already functioning remote control. If you...

Marantec Comfort 390 motorhoofd Let op! Deze motor wordt geleverd zonder ontvanger,handzender en rails!  De geïntegreerde stroomspaartechniek en LED-verlichting maken de aandrijving bijzonder energie-efficiënt, en de besturing ontziet de garagedeur. De gevoelige hindernisherkenning stopt de deur onmiddellijk en laat deze teruglopen zodra een hindernis...

The Ditec ZENP2 is a remote control with a white housing and 2 black buttons. The remote control has a frequency of 868 MHz and AES128 encryption. Attention! This model is not to be confused with the ZEN or ZEN C models, which have...

This glass fuse holder can be used to protect electrical circuits from excessive current. Easy to connect when installing an extra receiver as extra security. Supplied with a 100mA glass fuse. The holder is suitable for glass fuses of 5x20mm max. 5 ampere, has...

The Cody Touch is an illuminated modern anti-vandal wired surface-mounted code keypad in a black scratch-resistant metal frame with 12 keys and integrated blue lighting. The code panel is suitable for Cody Light decoders from Geba and is easy to connect via the 5...

The Telecody+ is a wireless code keypad with illuminated keys and a frequency of 868.8 MHz FM, suitable for L-Door installations with Sommer motor. The code panel is screwed into a vandal-resistant aluminum bracket that can be easily attached to the wall and cannot...

The Life FIDO2 is a remote control with a black housing, 4 dark gray buttons and a frequency of 433.92 MHz. This is an old model and was replaced by the Life MAXI 4 . We also offer an alternative for this remote control:...

The Novoferm Novotron 512 MIX 43-2 is a 2-button remote control with a frequency of 433.92 MHz and an average range of approx. 100 metres in open field. This remote control was replaced by a new model: Novotron 502 MAX 43-02 . For this...

The Nice SMILO SM2 is a 2-channel remote control with a frequency of 433.92 MHz. For this model we offer an alternative: VS-005-MULTI . Specifications Brand Nice Type SMILO SM2 Frequency 433.92 MHz Coding Rolling Code Number of buttons 2 Alternatives VS-005-MULTI

The Beninca IRI.TX4VA is an exclusive remote control with a refined finish and a chrome-plated bottom. IRI.TX4VA allows you to set up to 9 channels, thanks to the possibility of activating the command by simultaneously pressing two keys of your choice. With 12V battery...

The Ditec XENXR2 is a pre-wired 2-channel receiver operating at 433.92 Mhz, compatible with Ditec ZEN2, ZEN4, and GOL4 remotes. Specifications Brand Ditec Type ZENXR2 Frequency 433.92 Mhz Encoding  Ditec Dip Switch, Fixed code, Rolling code, AES 128-bit Encrypted Memory slots 200 Number of...

Nice Morx decoder voor EDS, EDSI en ETP  De Nice Morx decoder is een krachtige en betrouwbare oplossing voor toegangscontrole binnen automatiseringssystemen. Deze decoder is speciaal ontwikkeld voor gebruik met Nice codepanelen (EDS / EDSI) en transponderkaartlezers (ETP), waardoor je eenvoudig en veilig toegangssystemen...

The Marantec Digital 994 receiver is a small 1-channel receiver with a frequency of 868 MHz Bi-Linked and a protection degree IP40 (indoor use). This receiver is the ideal solution for connecting devices with a higher consumption (max. 10/16 A) such as additional lighting,...

Spare protective caps for the Digiten code keyboard from Armas Ferport, supplied per 2 pieces. Easy to replace in your current Digiten code keyboard.

Marantec Control 950 signal lamp with wall bracket, version 12V-24V DC, for signal indication before or during the movement of the gate/door. Supplied with wall bracket. Depending on the programming, the Control 950 can flash or remain continuously lit, and the lamp is 180-degree...

The Life MAXI 4 is a remote control with a blue/gray housing and 2 gray buttons and a frequency of 433.92 MHz. This remote control is the successor to the Life FIDO. We offer an alternative for this remote control: VS-005-MULTI . Specifications Brand...

The BFT Mitto 4 is an oval, dark gray remote control with 4 buttons and a frequency of 433.92 MHz rolling code. This model is still available, but there is also a new model available: Check out the Mitto COOL C4 . Looking for...

We also have a cheap alternative for this model: View the VS-SOM4-868 with included key strap The Sommer Slider Vibe TRX40-868-4 is a 4-channel remote control with a sliding housing made of stainless steel and plastic and SOMloq2 coding (Benelux). The remote control is...

The D313-868 is a 3-channel remote control with a light gray front and dark gray back for L-Door installations with a Marantec motor. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a coding plug. This is an...

The Seip RC-AM-433 is a 4-channel remote control with a frequency of 433.92 MHz AM. This model is no longer in production, so please order the VS-012-AM remote control instead. Please note, check the back of your remote control: This model also exists with...

The Crawford 4004 TX03-40-5 is a remote control with a frequency of 40.685 MHz, a dark gray housing and 5 red buttons. This model is no longer produced and was replaced by the much smaller Sommer 4050 TX02-40-2 mini . Also suitable for older...

The Dickert MAHS27-04 is a 4-channel remote control with red buttons and LED, a frequency of 27.015 MHz AM and microswitches on the inside (DIP-10). To program this remote control, you must set the switches to match those of an already functioning remote control....

The Nice MYGO8 is the latest model with a black casing, 8 black keys and a frequency of 433.92 MHz. The remote control is easily programmable via your existing Nice remote control, or can be programmed directly to a suitable receiver. The Nice MYGO8...

The Marantec D306-433 is a 10-channel remote control operating at 433 MHz. This handheld transmitter works on a frequency of 433.92 MHz Multi-Bit and comes with a wall mount and a coding plug. Easy to program using your current Marantec remote control and the...

Nice OXIBD plug-in receiver compatible with unidirectional radio codes O-Code, FloR, TTS, Smilo, Flo and with bidirectional BD code. Replaces the Nice OXI plug-in receiver. Works with the following Nice remote controls: -Flo1r-s, Flo2r-s, Flo4r-s -Flo2re -Era inti, Era one models -Smilo SM2, Smilo...