The Marantec D382-868 is a 2-channel remote control with a light gray front and dark gray back. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a wall bracket, sun visor bracket and a coding plug. The D382-868...

The Marantec D382-433 is a 2-channel remote control with a uniform light gray front and back. This remote operates on a frequency of 433.92 MHz Multi-Bit and comes with a wall mount, sun visor clip, and a programming plug. The D382-433 is the successor...

The Marantec D382-868 is a 2-channel remote control with a light gray front and dark gray back. This hand transmitter operates on a frequency of 868.3 MHz Multi-Bit and is the latest, smallest model that you can easily program via your current Marantec hand...

The Marantec D384-868 is a 4-channel remote control with a light gray front and dark gray back. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a wall bracket, sun visor bracket and a coding plug. The D384-868...

Wireless anti-vandalism keypad Marantec Command 222 868 MHz Multi-Bit with 3 channels. This robust keypad is designed to be resistant to vandalism, with a sturdy housing, metal keys and a special screw at the bottom. Thanks to the IP65 protection rating, the code panel...

The Marantec Digital 572 868 MHz is a 2-channel bi-linked remote control. The hand transmitter features secure bi-linked 128-bit radio technology and is compatible with all Marantec 300 series drives with white hand transmitters. Attention! Only works with the Marantec bi-linked series, recognizable by...

This coding plug allows you to connect/pair the grey D300 series Multi-Bit remote controls from Marantec with each other for programming. This coding adapter is supplied as standard with a new Marantec Multi-Bit remote control. The programming plug is suitable for the following models:...

The Marantec D313-868 is a 3-channel remote control with a light gray front and dark gray back. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a coding plug. This is an old model that was replaced by...

Marantec Command 231 868 MHz wireless keypad, with plastic housing, cover, red LED lighting and 3 channels. Thanks to the IP54 protection rating, the code panel is splash-proof. Watch the frequency! Check your Marantec remote control! Light gray front and dark gray back =...

The Marantec Command 222 keypad is protected against theft and therefore locked with an anti-theft screw. This key allows you to remove this screw so that you can replace the battery. This locking key is also suitable for the Faac RFWK code keypad. New...

Wireless code keypad Marantec Digital 526, 868 MHz bi-linked, with 4 channels, suitable for all Marantec bi-linked drive systems with white remote controls. The code panel has a sliding cover and red illuminated keys. Some features of the keypad: - 3 freely selectable codes...

The Marantec Digital 339.2 receiver is a 1-channel receiver with a frequency of 868 MHz and a protection degree IP20 (indoor use). Function / Application: - 1 channel for free assignment. - IMPULSE, continuous IMPULSE or ON/OFF function adjustable. - Potential-free switching functions (impulse/on/off/permanent...

The Marantec D302-868 is a 2-channel remote control with a light gray front and dark gray back. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a wall bracket and a coding plug. This is an old model...

The Marantec D392-433 is a 2-channel remote control with a uniform light gray front and back. This remote operates on a frequency of 433.92 MHz Multi-Bit and is the latest, smallest model that can be easily programmed using your current Marantec remote and the...

This coding cable/programming cable makes it possible to program a new Marantec D300 series remote control using an old D200 series remote control. The coding adapter is suitable for the following old Marantec D200 models: D211-433, D212-433, D214-433, D221-433, D222-433, D224-433, and also for...

If the cover of your Marantec Command 231 keypad is broken or needs to be replaced, you can easily replace it with this part. The cover flap can be easily attached to the Marantec 231 keypad. Suitable for: Marantec Command 231 868 MHz Marantec...

The Marantec D321-868 is a 1-channel remote control with a light gray front and dark gray back. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a wall bracket and a coding plug. This is an old model...

The Marantec D384-433 is a 4-channel remote control with a uniform light gray front and back. This remote operates on a frequency of 433.92 MHz Multi-Bit and comes with a wall mount, sun visor clip, and a programming plug. The D384-433 is the successor...

The Marantec Digital 564 868 MHz is a 4-channel bi-linked remote control, supplied with a handy wall bracket for mounting on the wall. The remote control features secure bi-linked 128-bit radio technology and is compatible with all Marantec 300 series drives with white remote...

The Marantec Comfort 51 SET is an all-in-one total solution for your garage door or door! The drive set consists of a complete motor with 2 remote controls and a 3-piece rail. This set is suitable for the most common garage doors and doors...

This reference cam must be placed on the toothed belt rail of your garage door and ensures that the motor can stop in time. If this is not present, the motor has no reference point. This is suitable for the older types of Marantec...

The Marantec Digital 992 receiver is a 2-channel receiver on 868 MHz bi-linked with a protection degree of IP20. The receiver has 2 channels for free assignment, pulse on/off for each channel and a connection for external button for direct switching of each relay....

The Marantec Command 131 868 MHz is a modern, wireless 2-channel push button with a frequency of 868 MHz, for Marantec Multi-Bit drives. The wall transmitter is easy to mount on a wall or wall, supplied with mounting material. Suitable for the following remote...

Wireless anti-vandalism keypad Marantec Command 222 433 MHz Multi-Bit with 3 channels. This robust keypad is designed to be resistant to vandalism, with a sturdy housing, metal keys and a special screw at the bottom. Thanks to the IP65 protection rating, the code panel...

Make any garage door opener or gate compatible with Marantec remote controls. The Marantec Digital 371 868.3 MHz conversion kit is a plug-in housing that allows your current garage door opener to work with Marantec remote controls. We provide this conversion kit with 2...

We only sell the version with cover: Marantec Digital 526 Wireless code keypad Marantec Digital 525, 868 MHz bi-linked, with 4 channels, suitable for all Marantec bi-linked drive systems with white remote controls. Attention! This code keypad does not work on Marantec motors with...

The Marantec D302-433 is a 2-channel remote control with a uniform light gray front and back. This remote control operates on a frequency of 433.92 MHz Multi-Bit and is supplied with a wall bracket and a coding plug. This is an old model that...

The Marantec Digital 343.2 receiver is a 2-channel receiver with a frequency of 868 MHz and a protection degree IP20 (indoor use). Function / Application: - 1 channel for free assignment. - IMPULSE, continuous IMPULSE or ON/OFF function can be set. - Potential-free switching...

Reducer from motor head to Marantec running rail. Transition piece between the serrated shaft of the motor head to the serrated entrance on the running rail. Specifications Brand Marantec Type Reducer from motor head to running rail (timing belt/chain/ball cord) Also known as Axle...

The Marantec D306-868 is a 10-channel remote control with a light gray front and dark gray back. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a wall bracket and a coding plug. Easy to program via your...

The Marantec Digital 339.2 receiver is a 1-channel receiver with a frequency of 433.92 MHz and a protection degree IP20 (indoor use). Function / Application: - 1 channel for free assignment. - IMPULSE, continuous IMPULSE or ON/OFF function adjustable. - Potential-free switching functions (impulse/on/off/permanent...

Marantec Command 231 433 MHz wireless keypad, with plastic housing, cover, red LED lighting and 3 channels. Thanks to the IP54 protection rating, the code panel is splash-proof. Watch the frequency! Check your Marantec remote control! Uniform light gray front and back = Command...

Wireless push button Marantec Digital 520 868 MHz bi-linked with 2 channels. The wall transmitter is easy to mount and is suitable for all Marantec bi-linked drive systems with white remote controls. Attention! This push button does not work on Marantec motors with gray...

Double the light capacity of your Marantec garage door motor with this EL300 LED set. This LED extension is compatible with the Marantec Comfort 360, Comfort 370 and Comfort 380 motors. Together with the existing LED strip, this kit can produce up to 1000...

The Marantec D304-868 is a 4-channel remote control with a light gray front and dark gray back. This remote control operates on a frequency of 868.3 MHz Multi-Bit and is supplied with a wall bracket and a coding plug. This is an old model...

Marantec Comfort 280 motor head, including Digital 572 2-channel transmitter (rail not included, optionally available). The integrated power-saving technology and LED lighting make the drive particularly energy-efficient, and the control system protects the garage door. The sensitive obstacle detection immediately stops the door and...

Make any garage door opener or gate compatible with Marantec remote controls. The Marantec Digital 371 868.3 MHz conversion kit is a plug-in housing that allows your current garage door opener to work with Marantec remote controls. We provide this conversion kit with 1...

For this model we offer an alternative: Emergency release lock for Garage door 12mm . The Marantec Special 306 is an emergency release for garage doors. This cylinder lock is subsequently installed in the gate and connected to the release mechanism of the drive...

Double the light capacity of your Marantec garage door motor with this EL200 LED set. This LED extension is compatible with the Marantec Comfort 260, Comfort 270 and Comfort 280 motors. Easy to plug in with a plug connection next to the existing LED...

Marantec Comfort 260 motor head, including 1 x Digital 572 2-channel transmitter (rail not included, optionally available). The integrated power-saving technology and LED lighting make the drive particularly energy-efficient, and the control system protects the garage door. The sensitive obstacle detection immediately stops the...

The Marantec Command 133 868 MHz is a modern, wireless 2-channel push button with a frequency of 868 MHz, for Marantec Multi-Bit drives. The wall transmitter is easy to mount on a wall or wall, supplied with mounting material. Suitable for the following remote...

The Marantec CS is a 1-channel plug-in receiver with a protection class IP20 and a frequency of 868.3 MHz multi-bit. This receiver is suitable for MFZ and Pro-Line CS300 / CS310 controls, has 1 channel for free assignment and is easy to plug into...

Expansion board Relay EP163 for Marantec 200-300 series garage door operators for connecting a warning light. This package consists of: - Expansion board. - Printed circuit board holder, 25 mm. - Connection cable. Features: - Programmable relay output. - Programmable input. - Suitable for...

View our alternative set: Universal Photocells 180 Degree Rotatable . The Marantec Special 633 is a one-way photocell with a range of up to 8 metres, suitable for swing and sliding gates, supplied without wiring. Features: • Optical safety feature to protect against injury...

The Marantec Digital 168 868 MHz is a 1-channel plug & play receiver with a frequency of 868.3 MHz Multi-Bit, suitable for the Marantec D200 and D300 series. Compatible with: - Marantec D200 and D300 engines: Comfort 260, 270, 280, 360, 370, 380, 260...

The Marantec D313-433 is a 3-channel remote control with a uniform light gray front and back. This remote control operates on a frequency of 433.92 MHz Multi-Bit and is supplied with a wall bracket and a coding plug. This is an old model that...

The Marantec Digital 993 868 MHz conversion kit is an intermediate plug housing that allows your current garage door operator to work with the white bi-linked remote controls from Marantec. With this set we also supply 1 x Digital 572 bi-linked remote control. This...

The Marantec Digital 361 receiver is a small 1-channel receiver with a frequency of 868 MHz and a protection class IP40 (indoor use). This receiver is the ideal solution for connecting devices with a higher consumption (max. 10/16 A) such as additional lighting, cooling,...

Marantec Comfort 360 motor head, including Multi-bit transmitter (rail not included, optionally available). The Marantec Comfort 360 is a premium model, particularly powerful with a pulling and pushing force of 650 N. The drive is suitable for slightly larger doors/gates, while still remaining energy-efficient...

Attention: This SZ-11 SL rail can only be picked up! The Marantec SZ-11 SL Timing belt rail is suitable for Marantec engines Comfort 220, 257.2, 260, 260 battery, 270, 280, 360, 370 and 380. This is a micro-profiled drive rail with 0.8 mm profile...